Installation of Signs and Decals
Do it your self and Save
Custom Die-Cut Vinyl
Installation
Reverse and straight cut lettering is for use when installing it from the back or front of a clear see through surface. Used for store front windows and signs that need a clean and smooth surface.
When you receive the custom lettering from Rueger Signs:
a) Remove the protective backing.
b) Positioning the Lettering
c) Firmly press in place
Custom Die-Cut Vinyl
Installation
Reverse and straight cut lettering is for use when installing it from the back or front of a clear see through surface. Used for store front windows and signs that need a clean and smooth surface.
When you receive the custom lettering from Rueger Signs:
a) Remove the protective backing.
b) Positioning the Lettering
c) Firmly press in place
ADA
Installation
1) Mounted on the wall adjacent to the latch side of the door.
2) Mounting height to be 60" above the finished floor to the center line of the sign.
3)Mounted so as to avoid the swing of a door of protruding objects.
4) In parking lot the sign should be a minimum of 6’ so it can not be obscured by parked vehicle.
5) Overhead Sign should be a minimum of 80" from the floor and 3" height text.